Ericsson GA628 - Manual (Page 25)

2. Press YES .
The display will show you from which phone
number the message is sent, or the name if
stored in your phone book. The display could
now look like this:
MmJenny r
The arrow shows that you can start scrolling
through the message with the right arrow key
3. Press the right arrow key to read the message.
When you have read a message, you can do one
of the following:
● Call a phone number in the message by press-
ing
YES .
● Erase the message by pressing YES at the
erase prompt.
● Store the message by pressing NO at the erase
prompt (you may get a reply prompt if the
sender has required a reply). Press
YES at the
Store prompt and the message is stored on the
SIM Card.
Reading an
Old Message
1. Select the Read menu.
2. Scroll to the message you want to read and
press YES .
3. Read through the message by pressing the
right arrow key.
Erasing a Message
● Press CLR any time during the message and
answer YES on the question prompt.
Receiving Area Information
This chapter describes how you can make your phone available for Area Information (AI).This
service is network dependent.
About Area
Information
While the SMS function is a personal service
with messages directed to you, the Area Infor-
mation is a broadcast type message that is sent
to all subscribers in a certain cell, for example a
section of a city, at the same time. You can set
your phone to receive only those types of mes-
sages you want to listen to, e.g.: the local
weather forecast or the local traffic report. Each
message is identified by a 3-digit code. Check
with your service provider for which message
types are available in your network.
When you receive an AI the display looks like
this:
The default setting for the phone is that the AI
service is turned off.
At present the following message types exists:
Code Title
000 Index
010 Flashes
020 Hospitals
022 Doctors
024 Pharmacy
030 Long-distance road reports
032 Local road reports
034 Taxis
040 Weather
EN
LZT 126 1352/7 R1A 19