EVGA Classified SR-2 - Manual (Page 23)

EVGA Classified SR-2 Motherboard
23
Securing the Motherboard into the Chassis
Most computer chassis have a base with mounting studs or spacers to allow
the motherboard to be secured to the chassis and help to prevent short
circuits. If there are studs that do not align with a mounting hole on the
motherboard, it is recommended that you remove that stud to prevent the
possibility of a short circuit. In most cases, it is recommended to secure the
motherboard using a minimum of nine (9) spacers.
1.
Carefully place the motherboard onto the studs/spacers located inside the
chassis.
2.
Align the mounting holes with the studs/spacers.
3.
Align the connectors to the I/O shield.
4.
Ensure that the fan assembly is aligned with the chassis vents according
to the fan assembly instruction.
5.
Secure the motherboard with a minimum of nine screws.