beautypg.com

Installation safety, Location safety, Important safety information – Dacor Transitional 36 Inch Freestanding Gas Smart Range Use & Care Manual User Manual

Page 10

background image

10 English

Impor

tant saf

ety inf

ormation

Important safety information

Make sure

your range is correctly installed and adjusted by a qualified service

technician or installer for the type of gas (natural or LP) you will use. For
your range to utilize LP gas, the installer must replace the 5 surface burner
orifices and 2 oven orifices with the provided LP orifice set, and reverse
the GPR adapter. These adjustments must be made by a qualified service
technician in accordance with the manufacturer’s instructions and all codes
and requirements of the authority having jurisdiction. The qualified agency
performing this work assumes the gas conversion responsibility.

Installation of this range must conform with local codes or, in the absence of
local codes, with the National Fuel Gas Code, ANSI Z223.1/NFPA.54, latest
edition. In Canada, installation must conform with the current Natural Gas
Installation Code, CAN/CGA-B149.1, or the current Propane Installation Code,
CAN/CGA-B149.2, and with local codes where applicable. This range has been
design-certified by ETL according to ANSI Z21.1, latest edition, and Canadian
Gas Association according to CAN/CGA-1.1, latest edition.

Location safety

WARNING

To reduce the risk of fire, electric shock, personal injuries, and/or death, observe
the following precautions.

This range is for indoor, household use
only.

Do not install

the range in areas

exposed to the weather and/or water.

Do not install

the range in a place

which is exposed to a strong draft.

Electrical service to the range must conform to local codes. Barring local
codes, it should meet the latest ANSI/NFPA No. 70 – Latest Revision (for the
U.S.) or the Canadian Electrical Code CSA C22.1 – Latest Revisions.

It is the personal responsibility of the range owner to provide the correct
electrical service for this range.

Installation safety

WARNING

To reduce the risk of fire, electric shock, personal injuries, and/or death, observe
the following precautions.

Have your range installed and properly
grounded by a

qualified installer

,

in accordance with the installation
instructions. Any adjustment and
service should be performed only by
qualified gas range installers or service
technicians.

Do not attempt

to service, modify, or replace your range or any part of your

range unless it is specifically recommended in this manual. All other service
should be referred to a qualified technician.

Always use new flexible connectors when installing a gas appliance.

Do not

use

old flexible connectors.

Make sure

the anti-tip device is properly installed on the range. See the

installation instructions for more information.

Due to the size and weight of the range, have

two or more people

move the

range.

Remove

all tape and packaging materials.

Remove

all accessories from the cooktop, oven, and/or lower drawer. Grates

are heavy. Use caution when handling them.

Make sure

no parts came loose during shipping. Do not install in an area

exposed to dripping water or outside weather conditions.

DOP36P86GLS_DG68-01105D-00_EN+MES+CFR.indb 10

2020-07-06 오후 4:26:59