Ericsson WCDMA/HSDPA - Manual (Page 53)

PC Configuration
5. Click Finish . The Map Network Drive window is closed. The device is
displayed in the My Computer window as a new partition.
Windows 2000
Follow the steps below to configure a connection to a shared storage
device from a PC using Windows 2000:
1. Right-click the My Computer icon and select Map Network Drive...
The Map Network Drive window is displayed.
2. Select a drive that is not already used from the Drive list.
3. In the Folder field, type \\\. You find
the host name and share name on the File & Printer Sharing page.
4. Click Finish . The Map Network Drive window is closed. The device is
displayed in the My Computer window as a new partition.
3.3.4 Setting Up Connection to a Network Printer
Follow the steps below to set up a set up a mapping to a network printer
from a PC using Windows XP or 2000:
Windows XP
Follow the steps below to set up a connection to a network printer on a PC
using Windows XP:
1. In the Windows task bar, click the Start button, and then click Control
Panel. The Control Panel window is displayed.
2. If you are using Category View, click Printers and Other Hardware
and then Printers and Faxes. If you are using Classic View, double-
click Printers and Faxes. The Printers and Faxes window is
displayed.
3. From the File menu, select Add Printer. The Add Printer Wizard is
started.
4. Follow the instructions in the wizard to install the printer.
1/1551-CRH 102 167 PA15 2006-08-16 47