Ericsson WCDMA/HSDPA - Manual (Page 29)

Configuration and Management
To change the W20 IP address or subnet mask, type the new value in the
corresponding field and click
Apply to save the settings.
Note: If you change the LAN IP address while connected to the Ericsson
W20 web pages through a web browser, you will be disconnected.
You have to redirect the web browser to the new address in order
to confirm the new settings. Type the new LAN IP address in the
Address (URL) field and press the
key.
2.5.1 Connected Devices
The Connected Devices table includes information about all connected
LAN devices.
The MAC (Media Access Control) address of the
device. MAC Address
The IP address of the device. IP address
The unique name of the device. Name
The type of connection, which is either
Ethernet Connection
or
USB
2.5.2
Traffic Statistics
The following information is displayed in the Traffic Statistics section on
the LAN page:
The total size (and number) of transmitted data
packets on the LAN. Transmitted
packets
The total size (and number) of received data packets
on the LAN. Received
packets
The number of invalid data packets. Error
The number of packet loss due to too many
incoming data packets. Overruns
The number of dropped data packets. Dropped
Note: The data size and packet counters have the upper limits of 4 GiB
and 2 32 packets (more than 4 billion packets). When these limits
have been reached, the counters wrap around to zero.
1/1551-CRH 102 167 PA15 2006-08-16 23