Ericsson WCDMA/HSDPA - Manual (Page 18)

Configuration and Management
To enable connection of one or more wireless devices to the Ericsson W20,
select the Enable WLAN check box on the Wireless LAN: WLAN Access
Point page and click
Next to proceed.
If you are not going to set up any wireless LAN, just click Next on the
Wireless LAN: WLAN Access Point page. The last page of the wizard,
where you can review and confirm your settings, is displayed:
Figure 11 Confirm page
Check the information on this page and click
Finish to confirm the
settings.
Region
To make sure the Ericsson W20 operates on correct radio frequencies
according to local regulations, you have to state in which region you reside.
After this you cannot select any radio channel that would be against the
regulations.
Figure 12 Wireless LAN: Region page
Select your country domain from the Region list on the Wireless LAN:
Region page and click
Next to proceed.
12 1/1551-CRH 102 167 PA15 2006-08-16