Elmo Document Camera P30S - Manual (Page 42)

121
121
OPERA
T
ION OF THIS
CAMERA
ENGLISH
The brightness of video can be adjusted by adjusting the lens iris.
1.
When the OSD menu is in display, hide the OSD menu by operating the front operating
panel or repeatedly pressing the [BACK] button on the wireless remote control.
When [ HIDE MENU] is ON, cancel it.
2.
Press the [ ] button on the front operating panel or the [ ] button on
the wireless remote control to switch the output video to the camera video.
3.
Press the [MENU/ENTER] button on the front operating panel or wireless remote control.
The OSD Main menu appears.
4.
Select [ SETTINGS] from the OSD Main
menu by using the [ ] buttons on the
front operating panel or wireless remote control.
The OSD Setting menu appears.
5.
Select [ BRIGHTNESS] → [AUTO] from
the OSD Setting menu by using the
[
] buttons on the front
operating panel or wireless remote control.
6.
Select [ BRIGHTNESS SETTING] →
[ADJUST] from the OSD Setting menu
by using the [
] buttons on the
front operating panel or wireless remote
control, and set the level bar by using
the [
] buttons.
The degree of brightness for auto following
can be adjusted.
Alternatively, by pressing the [ ] and [ ]
buttons in the [BRIGHTNESS] item on the
wireless remote control, the degree of
brightness can be adjusted.
Adjusting Brightness
For Adjusting Brightness Automatically
Note:
• When [BRIGHTNESS SETTING] → [NORMAL] are selected from the OSD Setting menu, the current
settings are reset to the initial settings. Alternatively, by selecting [NORMAL] in the [BRIGHTNESS]
item on the wireless remote control, the current settings can be reset to the initial settings.
OSD Main Menu
OSD Setting Menu
M A N U A L
A U T O
OSD Setting Menu
A D J U S T
N O R M A L
Level bar
書画カメラ P30S.book 121 ページ ２００８年１月２４日 木曜日 午後６時３８分