Elmo Document Camera P30S - Manual (Page 39)

118
ENGLISH
OPERA
T
ION OF THIS
CAMERA
1.
When the OSD menu is in display, hide the OSD menu by operating
the front operating panel or repeatedly pressing the [BACK] button on
the wireless remote control.
When [ HIDE MENU] is ON, cancel it.
2.
Press the [ ] buttons on the
front operating panel to select the
video switching to any video.
• [ ] button:
To switch the output video to the camera
video
• [ ] button:
To switch the output video to the RGB IN
video
• [ ] button:
To switch the mode of the output video
to the SD mode
When the wireless remote control is used,
press the [
] button, the [ ] button
and the [ ] button.
Switching Video
Note:
• When the PC or other device is connected to the analog RGB input terminal [RGB IN], the
output video from the analog RGB output terminal [RGB OUT] can be switched without any
trouble to exchange the connection cable.
• From the video output terminal [VIDEO OUT] and the DVI output terminal [DVI OUT], only
the camera video is output and the [RGB IN] video cannot be output.
• If the mode is switched to the SD mode when the SD card is not set in the Camera, the
screen is blacked out.
• If the RGB input terminal [RGB IN] is not connected to the PC or other unit, nothing appears
on the screen.
• When [GUIDE] on the OSD Setting menu is set to [ON], the settings appear on the screen.
• When a laptop having an external output mode switching function is used, switch the video
output of this Camera to [PC] and then set the notebook PC to the external output mode.
CAMERA CAMERA
SD mode
PC PC
CAMERA
PC
書画カメラ P30S.book 118 ページ ２００８年１月２４日 木曜日 午後６時３８分