Elmo Document Camera P30S - Manual (Page 13)

92
ENGLISH
OUTLINE OF THIS
CAMERA
Rear Panel
Name Function Reference page
①
S-VIDEO OUT
(S-Video Output
Terminal)
To output video from the Mini DIN4P terminal to the
NTSC/PAL-system monitor (e.g., TV monitor).
P.110
②
VIDEO OUT
(Composite Video
Output Terminal)
To output video from the RCA pin-jack terminal to
the NTSC/PAL-system monitor (e.g., TV monitor).
P.109
③
DVI OUT
(DVI Output Terminal) To output digital video signal to the DVI input
device (e.g., projector, PC monitor).
P.108
④
RGB OUT
(Analog RGB Output
Terminal)
To output analog video signal to the RBG input
device (e.g., projector, PC monitor).
P.108
⑤
RGB IN
(Analog RGB Input
Terminal) To output the input video from the analog RGB
output terminal when [RGB IN] is selected in the
Display mode.
P.109
⑥
RS-232C
(RS-232C Terminal) To control the main body from the PC through the
connected RS-232C cable.
P.146
⑦
12VDC IN
(Power Socket)
A plug-in receptable for the AC adapter. P.107
⑧
DIP Switch
To execute the following switching:
[A] key: Invalid
[B] key: Invalid
[C] key: To switch the video output system
[D] key: To switch the video output screen size.
－
Note:
• When changing the DIP switch key settings, be sure to turn OFF the power supply to the
main unit beforehand.
• The defaults of the DIP switch vary depending on the place where the Camera is used.
ӱ
Ӳ
ӳ
Ӵ
ӵ
ӷ
Ӷ
Ӹ
0
1
A B C D
Display of Rear panel 0
1
[C] key
NTSC
PAL
[D] key
Over-scan
Under-scan
[A] key
Invalid
[B] key
Invalid
書画カメラ P30S.book 92 ページ ２００８年１月２４日 木曜日 午後６時３８分