Elmo Document Camera P30S - Manual (Page 28)

107
107
OUTLINE OF THIS
CAMERA
ENGLISH
1.
Connect the supplied power cord to the AC adapter beforehand.
2.
Plug the DC plug of the AC adapter into the 12VDC IN terminal of the
rear panel.
3.
Plug the AC adapter into the outlet.
Connecting AC Adapter and Video Cable
Note:
• To protect the Camera and the peripheral units to be connected to the Camera, be sure to turn
OFF the power supply to all peripheral units to be connected and unplug the power plug from
the outlet beforehand.
• When plugging/unplugging the power plug, the AC adapter and the video cable, hold on to
their cable connector plugs.
• For the information of how to switch the output video, refer to "Switching Video" (P.118).
• For the information of how to switch the video output system, refer to "DIP Switch" (P.92).
① For Connecting AC Adapter
Ӳ
ӳ
Ӵ
ӵ
Ӷ
ӷ
USB terminal
ȆTo PC
DVI OUT terminal
ȆTo projector
ȆTo PC monitor
RGB OUT terminal
ȆTo projector
ȆTo PC monitor
RGB IN terminal
ȆTo PC
VIDEO OUT terminal
ȆTo TV monitor
S-VIDEO OUT terminal
ȆTo TV monitor
ӱ
12VDC IN terminal
ȆTo AC adapter
SD card
書画カメラ P30S.book 107 ページ ２００８年１月２４日 木曜日 午後６時３８分