Side burner installation – Wolf 30 Inch Built-in Gas Grill Installation Guide User Manual
Page 16
16
|
Wolf Customer Care 800.222.7820
Side Burner Installation
LP GAS CONNECTION
1
Connect 2-stage LP gas regulator to flare tee at location
shown. Connect flare swivel connector to one end of
flare tee. Refer to the illustration below.
2
Connect regulator assembly to flexible gas line coming
into grill cart from side burner as shown in the illustration
below.
3
Connect regulator assembly assembly to grill manifold at
flare swivel connector as shown in the illustration below.
4
Reinstall rear panel and door of grill cart. Reposition grill
drip tray. Place burner cap on burner head, place grate
on burner pan and affix knob to bezel with bezel nylon
liner.
NATURAL GAS CONNECTION
1
Split high pressure natural gas line into two lines, one to
attach to grill natural gas regulator and one to attach to
side burner via flexible line and
1
/
2
" NPT adapter. Place
flexible gas line through cart access hole.
2
Place flexible gas line through cart access hole and
attach to side burner regulator at pipe elbow. Elbow may
be rotated to face downward for larger adapters. Do not
rotate elbow upward. Refer to the illustration below.
INSTALLATION
FLARE
SWIVEL
LP GAS
REGULATOR
FLARE
TEE
FLEXIBLE
GAS LINE
GRILL
MANIFOLD
LP gas regulator assembly.
LP gas connection.
Natural gas connection.