Wolf 30 Inch Built-in Gas Grill Installation Guide - Manual (Page 15)

wolfappliance.com | 15
Side Burner Installation
ELECTRICAL CONNECTION
1 Depending on the serial number of the grill, there may
be one or two connectors near the front of the grill just
above the manifold. Refer to auxiliary harness section
for serial numbers. Locate the connector(s) by looking
above the manifold near the front of the grill.
2 Remove the unpopulated connector housing(s) from the
wire harness(es) coming from the grill as shown in the
illustration below.
3 Attach the appropriate connector housing(s) from the
side burner to the grill. Refer to the illustration below.
If only one connector is found on the grill, refer to the
auxiliary harness section for assembly of the second
connector housing.
INSTALLATION
UNPOPULATED
CONNECTORS
UNPOPULATED
CONNECTORS
AUXILLARY
HARNESS
Connectors.
Connector housing.