LG TurboSteam Series 27 Inch Electric Dryer User Manual and Installation Guide - Manual (Page 37)

37 OPERATION
ENGLISH
Cycle Guide
Sensor Dry Cycles
Sensor Dry cycles utilize LG’s unique dual sensor
system to detect and compare the moisture level
in clothes and in the air and adjust the drying time
as needed to ensure superior results. The dryer
automatically sets the dryness level and temperature
at the recommended setting for each cycle. The
estimated time remaining will be shown in the display.
NOTE
• To protect your garments not every dryness level,
temperature, or option is available with every cycle.
See the Cycle Guide for details.
Manual Dry Cycles
Use Manual Dry cycles to select a specific amount of
drying time and a drying temperature. When a Manual
Dry cycle is selected, the Estimated Time Remaining
display shows the actual time remaining in your
cycle. You can change the actual time in the cycle by
pressing the More Time or Less Time buttons.
NOTE
• The Energy Saver option is turned on by default in
the Normal Cycle. Turn off the Energy Saver option
for a faster Normal cycle which begins with heated
drying. To turn the Energy Saver default off, press
and hold the Energy Saver button. ON or OFF
appears in the display.
NSF Certification
NSF International (formerly the National Sanitation
Foundation), certifies that the Antibacterial cycle
reduces 99.9% of bacteria on laundry, and none of
the bacteria will carry over onto the next laundry load.
• The default settings for the Antibacterial cycle are
High temperature and Very dry level. These default
settings cannot be changed.
• Do NOT use this cycle with delicate items or fabrics.
Protocol P154 Sanitization
Performance of Residential
Clothes dryer
(DLE3500*, DLG3501*, DLEX3700*, DLGX3701*,
DLEX3900*, DLGX3901*)