EVGA NFORCE 680I SLI 122-CK-NF68-XX - Manual (Page 48)

Introduction
xlvii
Use the following procedure to configure Teaming:
31. Select
Start¾All Programs¾NVIDIA Corporation¾NVIDIA Control Panel
to display the NVIDIA Control Panel.
32. Click on the networking icon to display the Networking Control Panel
Categories.
33. Select Adjust Teaming configuration to display the teaming configuration
window. Note that by default, Teaming is disabled.
34. Select Combine my network adapters (recommended) radio button to
enable Teaming.
35. Click Apply to enable teaming.
‰ Installing Graphics Cards in an
SLI Configuration on page 67.
‰ Power Supply
The power supply requirement is dependent upon the power and the