Epson AcuLaser CX11NF - Manual (Page 50)

50
Reports
Report (Communication) Setup Settings
You can specify the following settings for fax communication reports.
Follow these steps to change the report settings.
1. Press the Setup button.
The Setup light turns on and the Setup menu appears in the LCD screen.
2. Press the
d
button twice to select Fax Settings , then press the
r
button.
The Fax Settings menu appears.
3. Press the
u
or
d
button several times to select Report (Communication) Setup ,
then press the
r
button.
The Report Setup menu appears.
4. Press the
u
or
d
button to select the report you want, then press the
r
button.
5. Press the
u
or
d
button to select the setting you want, then press the
r
button.
6. To exit the settings, press the
l
button several times or press one of the mode
buttons.
Type of Report Description and Settings
Activity Report This report contains transmission and reception information.
On Print this report automatically for every 50 transmissions.
Off To not print this report automatically.
Transmission
Report This report contains transmission information such as start time,
number of pages, and transmission result.
On Print this report automatically each time a fax
transmission occurs.
Error Only Print this report automatically only when an error occurs.
Off To not print this report.
Multiple Trans
Report This report contains transmission information for multiple
transmissions.
On Print this report automatically each time a multiple fax
transmission using group dial occurs.
Error Only Print this report automatically only when an error occurs.
Off To not print this report.