Epson AcuLaser CX11NF - Manual (Page 15)

Receiving Faxes
15
Receiving Faxes
3
There are four modes for receiving faxes. The default setting is Fax only.
To change Incoming Mode settings, follow these steps.
1. Press the Setup button.
The Setup light turns on and the Setup menu appears in the LCD screen.
2. Press the
d
button twice to select Fax Settings, then press the
r
button.
3. Press the
d
button twice to select Reception Settings , then press the
r
button.
4. Press the
d
button twice to select Incoming Mode, then press the
r
button.
Item Description
Auto switching The call is received by the attached phone and the CX11NF
automatically answers after the phone rings for a certain
duration specified by the Attached Phone Timeout setting.
Fax only The CX11NF automatically answers and receives the fax.
Phone only The call is received by the attached phone. Fax reception is
not performed.
TAM When an attached phone detects a fax/phone signal while
answering an incoming call, the CX11NF automatically
receives the fax.