Epson AcuLaser CX11NF - Manual (Page 17)

Using Fax Polling
17
Using Fax Polling
This function is used to get the identifying information stored in the other party’s fax
machine.
1. Make sure the CX11NF is in Fax mode. If not, press the Fax button.
2. Enter the other party’s fax number using the numeric keypad.
3. Press the
u
or
d
button several times until Polling Rcptn appears, then press the
l
or
r
button to select On .
4. When you hear a beep sound or voice guidance, press the
x B&W Start or
x Color Start button to start the transmission.
Accessing Settings for Receiving Faxes
You can specify the following settings for receiving faxes.
1. Press the Setup button on the control panel.
The Setup light turns on and the Setup menu appears in the LCD screen.
2. Press the
d
button twice to select Fax Settings , then press the
r
button.
The Fax Settings menu appears.
3. Press the
d
button twice to select Reception Settings , then press the
r
button.
4. Press the
u
or
d
button several times to select the item you would like to change,
then press the
r
button.
When you set the Attached Phone Timeout, you can also specify the number of
seconds with the numeric keypad.
Setting Options
Paper Cassette Auto, MP Tray, Paper Cassette
Incoming Mode Autoswitching, Fax only, Phone only, TAM
Attached Phone Timeout 1 to 99
DRPD On, Off (Normal, All)