Epson AcuLaser CX11NF - Manual (Page 11)

Using Speed-Dial Codes
11
Before using the speed dial function, you need to register recipient fax information
beforehand. For details, see page 21.
1. Make sure the CX11NF is in Fax mode. If not, press the Fax button.
2. Place your original either on the document table or in the Auto Document
Feeder. For details, see page 9.
3. Press the Speed Dial button.
The registered recipient list appears in the LCD screen.
4. Press the
u
or
d
button until the recipient you want is selected, then press the
r
button.
The selected recipient appears in the second top row in the LCD screen.
You can also select a recipient by entering the number directly.
To display the details of the assigned recipient, press the Menu button while the
recipient is selected. To return to the list again, press either the Menu button or
the
l
button.
5. Specify any settings if necessary. You can specify the Document Size, Density,
Image Quality, Polling Reception, and Overseas transmission mode settings. For
details, see page 44.
6. To send a black-and-white fax, press the x B&W Start button. To send a color
fax, press the x Color Start button.
Note:
When the recipient’s fax machine supports only black-and-white fax, a color fax is
received as a black-and-white fax even if you press the x Color Start button.
Press the Speed
Dial button