Enterasys Networks FN 100 - Manual (Page 29)

Managing the Hub 2-13
The FN100 Chassis View
If the specified MAC address is located, a list of the interface(s) through which the
given address is communicating displays in the list box. A status message at the
bottom of the window will display
the number of interfaces through which the
given MAC address is communicating.
If the specified MAC address cannot be found, a “Source Address not found”
message displays.
Viewing I/F Summary Information
The I/F Summary menu option available from the Device menu lets you view
statistics for the traffic processed by each network interface on your device. The
window also provides access to a detailed statistics window that breaks down
Transmit and Receive traffic for each interface.
To access the I/F Summary window:
1. From the Module View, click on the Device option from the menu bar.
2. Click again to select I/F Summary, and release. The I/F Summary window,
Figure 2-7 , will appear.
Figure 2-7. I/F Summary Window
The I/F Summary window provides a variety of descriptive information about
each interface on your device, as well as statistics which display each interface’s
performance.
NOTE
If the MAC address is entered in an incorrect format, an “Invalid MAC Address.
Enter Valid MAC Address
” message displays. Enter the address in the correct
XX-XX-XX-XX-XX-XX hexadecimal format.