Euro-Pro 9110 User Manual

Page 58

It is easier to guide the fabric and you have a

better view of the seam when using the

standard, regular foot on your machine. Your

sewing machine offers excellent stitch quality

on a wide range of fabrics from delicate

chiffons to multiple layers of denim.

WALKING FOOT

Please Note: Always try to sew first without the walking foot
accessory which should be used only when necessary.

The Walking Foot accessory equalizes the

feeding of the upper and lower layers of fabric

and improves the matching of plaids, stripes

and patterns. It also helps to prevent uneven

feeding of very difficult fabrics.

1. Lift the presser foot lifter to raise the

presser foot bar.

2. Remove the presser foot holder by

unscrewing (counterclockwise) the presser

bar attaching screw.

3. Attach the Walking Foot to the machine as

follows:
- The arm (a) should fit into above the

needle screw and clamp (b).

- Slide the plastic attaching head (c) from

your left to right so that it is fitted into the

presser foot bar.

- Lower the presser foot bar.
- Replace and tighten (clockwise) the

presser bar attaching screw.

- Make sure both the needle screw and the

presser bar attaching screw are tightly

secured.

4. Draw the bobbin thread up and place both

the bobbin thread and the needle thread

behind the walking foot attachment.