Euro-Pro 9110 - Manual (Page 20)

THREADING THE UPPER THREAD
THREADING THE UPPER THREAD
Please Note: It is important to carry out the threading correctly as by not doing so several
sewing problems could result.
Start by raising the needle to its highest point, and
also raise the presser foot to release the tension
discs.
1. Lift up the spool pin. Place the spool of thread on the
spool pin so that the thread comes from the front of the
spool, then place the spool cap at the end of the spool pin.
2. Draw the thread from the spool through the upper
thread guide.
3. Guide the thread around the thread guide pulling the
thread through the pre-tension spring as illustrated.
3
5
6
7
8
3 5
1
2
3
4
1
4
2
4
15