Euro-Pro 9110 User Manual

Page 44

ADJUSTING PATTERN BALANCE

If the decorative stitch patterns, numbers or manual buttonhole stitch are uneven when

you sew on a particular fabric, adjust them with the feed balancing dial.

The dial should usually be in a neutral

position.

Adjusting distorted stretch stitch patterns
A. When Patterns are too compressed, correct

by turning the dial in the direction of "".

B. Correct setting.
C. When Patterns are too drawn out, correct

by turning the dial in the direction of "+".

Adjusting distorted letters or numbers
A. When the letters or numbers overlap, turn

the dial to "".

B. Correct setting.
C. When the patterns are too drawn out,

correct by turn the dial to "+".

Adjusting the stitch density for buttonhole
A. Right side is denser. If the left side of the

buttonhole is less dense than the right side,

turn the feed balancing dial to "".

B. Correct setting.
C. Left side is denser. If the right side of the

buttonhole is less dense than the left side,

turn the feed balancing dial to "+".