Euro-Pro 9110 - Manual (Page 13)

8
STARTING SEWING
STARTING SEWING
Start/stop button
With the sewing machine turned off,
insert the foot control plug into its
connector on the sewing machine.
Turn on the sewing machine, and then
slowly depress the foot control to start
sewing.
Release the foot control to stop the
sewing machine.
Foot control
The machine will start running when
Start/stop button is pressed and will stop
when pressed the second time.
The machine will rotate slowly at start of
sewing.
The speed limiting adjustment lever can
control the sewing speed. To increases
the speed, slide the lever to the right , To
decrease the sewing speed, slide the
lever to the left.
Please Note: The setting of the speed limiting adjustment lever will limit the maximum
speed of the machine.
Attention: Consult a qualified electrician if in doubt as how to connect the machine to
the power source. Unplug the power cord when the machine is not in use.
The appliance must be used with the foot controller C-9000 manufactured by CHIEN
HUNG TAIWAN., LTD.