Euro-Pro 9110 User Manual

Page 39

Change the presser foot to the button sewing

foot.

2. Position the work under the foot. Place the

button in the desired position, lower the

foot.

3. Select zig zag pattern. Adjust the stitch

width to "2.0-7.0" according to the distance

between the two holes of the button.

4. Turn the handwheel to check that the

needle goes cleanly into the left and right

holes of the button.

5. Before sewing, press the Auto-lock button

to sew reinforcement stitches automatically

at the beginning and at the end of the stitch.
If a shank is required, place a darning

needle on top of the button and sew.

6 For buttons with 4 holes, sew through the

front two holes first, push work forward and

then sew through the back two holes.

1. Move the drop feed control to " " to

lower the feed dogs.

.......

BUTTON SEWING

2.0~7.0