beautypg.com

Matching needle/ fabric/ thread, Replacing the needle – Euro-Pro 9110 User Manual

Page 15

background image

MATCHING NEEDLE/ FABRIC/ THREAD

MATCHING NEEDLE/ FABRIC/ THREAD

NEEDLE, FABRIC, THREAD SELECTION GUIDE

10

Please Note:
- In general, fine threads and needles are used for sewing fine fabrics, and thicker threads

are used for sewing heavy fabrics.

- Always test thread and needle size on a small piece of fabric which will be used for actual

sewing.

- Use the same thread for needle and bobbin.

Attention: Turn power switch to off. (

when carrying out any of the above
operations!

"O")

Change the needle regularly, especially if it is

showing signs of wear and causing problems.
Insert the needle following the illustrated

instructions.
A. Loosen the needle clamp screw and tighten

again after inserting the new needle.

The flat side of the shaft should be towards the

back.

B. Insert the needle as far up as it will go.
Needles must be in perfect condition.
Problems can occur with:

- Bent needles

- Blunt needles

- Damaged points

A

B

REPLACING THE NEEDLE

REPLACING THE NEEDLE

Heavy duty thread, carpet thread.

16 (100)

11-14 (80-90)

Medium weight fabrics-cotton, satin,

kettleclote, sailcloth, double knits,

lightweight woollens.
Medium weight fabrics-cotton duck,

woolen, heavier knits, terrycloth,

denims.
Heavyweight fabrics-canvas, woolens,

outdoor tent and quilted fabrics,

denims, upholstery material (light to

medium).
Heavy woollens, overcoat fabrics,

upholstery fabrics, some leathers

and vinyls.

14 (90)

18 (110)

NEEDLE SIZE

FABRICS

THREAD

9-11 (70-80)

Lightweight fabrics-thin cottons, voile,

serge, silk, muslin, Qiana, interlocks,

cotton knits, tricot, jerseys, crepes,

woven polyester, shirt & blouse fabrics.

Light-duty thread in cotton, nylon,

polyester or cotton wrapped

polyester.

Most threads sold are medium

size and suitable for these

fabrics and needle sizes. Use

polyester threads on synthetic

materials and cotton on natural

woven fabrics for best results.

Always use the same thread on

top and bottom.