beautypg.com

Elation Professional Design Spot 250 Pro User Manual

Page 31

background image


Design Spot 250 Pro™

©Elation Professional® 31 Design Spot 250 Pro™

8.5.3 Reset Colors: This function will only reset the color wheel to the home position.


8.5.4 Reset Gobos: This function will only reset the gobo wheels to the home position.


8.5.5 Reset Shutter: This function will only reset the blackout shutter to the home

position.


8.5.6 Reset Others: This function will reset all other motors not associated with any in

the previously listed reset commands to the home position.

8.6 Effect Adjust:

8.6.1 Test Channel – This menu function allows the user to select each individual

fixture channel and test it’s function independently from the control board.

8.6.2 Lamp adjustment (manual control) – This function readies the fixture for lamp

optimization in a simple single step procedure. This function will center the pan

and tilt motors and at the same time open the shutter and bring the dimmer to

100%. The pan and tilt function will still operate if the fixture needs to be

positioned to a flat clear surface. For more information on lamp optimization

please see Section 5/Page 12.

8.6.3 Calibrate values – This function should only be performed by a technician

qualified to do so. This function allows a user to make small adjustments to the

effect wheels (color, gobo, shutter, etc) to compensate for ware or in the event a

sensor has been knocked slightly out of place. Because improper use of this

function can result in undesired operation this function has been password

protected. The password is 050 and must be entered each time the calibration

menu function is entered. Because calibration is an extremely delicate procedure

instruction on performing this action are left out of this manual. For a first time

calibrator, please contact our customer support team for step by step instructions.

8.7 User Mode Set:

8.7.1 User mode – This function allows the user to create a user defined channel

orders. This will allow the fixture to match the channel order of other fixtures on