Elation Professional Design Spot 250 Pro User Manual

Page 23

Design Spot 250 Pro™

©Elation Professional® 23 Design Spot 250 Pro™

8.1 Function Mode:

8.1.1 “Set DMX Address” - DMX address setting – This function is used to set or

adjust the fixture’s starting DMX address. Every device controlled by DMX has to have a

unique starting address. The addressing feature is what allows DMX to function

properly. The DMX address of a fixture is what allows it to communicate with a controller

properly. The DMX addressing also allows the fixture to ignore any DMX information

coming from the controller that is not meant specifically the fixture. Because each fixture

is connected in a daisy-chain fashion it is imperative to assign a proper and unique

starting DMX address to each and every fixture. The DMX address is non-destructive

and will remain in the fixture’s memory even when the power to the unit is switched off.

Memory is backed-up and retain by an internal power source that should last about five

years. For proper DMX addressing see Section 10/Page 33 of this user manual.

Manual Control

PAN

PAN =XXX

Fine adjustment of the lamp

Calibrate Values

--Password--
Color wheel

Password=XXX
Color wheel=XXX

Calibrate and adjust the
effects to standard/right
position. Password “050”

User Mode

XXXXXX (Band)
User Mode A
User Mode B
User Mode C

User’s mode to change
channel numbers

Edit User Mode A
Edit User Mode B
Edit User Mode C

PAN

PAN = CH01

Preset User modes

Select Programs

Auto Pro Part 1
Auto Pro Part 2
Auto Pro Part 3

Program 1 ~ 10 Program 1
Program 1 ~ 10 Program 2
Program 1 ~ 10 Program 3

Select programs to be run

Edit Program

Program 1
:
Program 10

Program
Test
Step
01=SCxxx
Step
64=SCxxx

(“STEP
XX”)

Testing program
Program in loop
Save and exit

Edit Scenes

Edit Scene 001
~ Edit Scene
250

Pan, Tilt,…
--Scene
Time--
Input

Outside

Pan=xxx
TIME=xx.xs

Save and automatically
return
Manual scenes edit

Rec. Controller

XX~XX

Automatic scenes rec