Elation Professional Design Spot 250 Pro - Manual (Page 28)

Design Spot 250 Pro™
©Elation Professional® 28 Design Spot 250 Pro™
at its last settings. “Auto” – Fixture will go into stand-alone mode, running the built-in
program. “Music” – The fixture will go into sound-active mode.
Pan Reverse - This function allows you to invert all pan movements. Use the Up
and Down buttons to turn this function On or Off. Press the Enter button to accept
the change or the Mode button to cancel and return to the main menu. This function
is “OFF” by default.
Tilt Reverse - This function allows you to invert all tilt movements. Use the Up and
Down buttons to turn this function On or Off. Press the Enter button to accept the
change or the Mode button to cancel and return to the main menu. This function is
“OFF” by default.
Fine Resolution – This function changes the DMX channel operation from 8bit (14
channels) to 16bit (16 channels). This function is “on” by default, which allows for the
“Pan Fine” and “Tilt Fine” channels to be accessed. When this function is turned off
the fixture will operate without access to the “Pan Fine” and “Tilt Fine” DMX channels,
thus reducing the overall DMX channels needed to operate the unit to 14.
Pan Degree – This function changes the maximum Pan resolution from either 540˚
or 630˚. The default function is 540˚. 630˚ operation allows for greater coverage, but
slower pan movement.
Dimmer Speed – This function changes the functionality of the dimmer shutters
from a slower speed to a faster speed. This function is set to “Slow” as default to
support and match the slower speed of the first generation Design Spots. If this
fixture will not be mixed with older generation Design Spots this setting may be
changed to quick to allow for more dramatic dimmer operation.
Feedback – This function turns the feedback correction on or off. This function is set
to “ON” as default. This function allows for automatic pan and tilt correction in the
event either one disrupted during normal operation.