Eclipse - Fujitsu Ten CD3434 - Manual (Page 29)

29
Basic operation
ATTENTION
To disable the loudness feature, repeat the above procedure to
display the [LOUD OFF] indication.
ATTENTION
If the battery terminals have been disconnected because of a
reason such as vehicle maintenance, the SVC settings will return
to their default values. If this happens, you will need to make the
settings again.
The loudness control may be turned on to emphasize low and high
frequencies at low volume levels.
Loudness compensates for the apparent weakness of low and high
frequencies at low volume by boosting the bass and treble levels.
Enabling the loudness control
Press and hold the [AUDIO CONTROL] button until the
[LOUD ON] display appears on the screen.
1
Turn the [AUDIO CONTROL] button to the left or right.
Turn to the right: Increases the SVC setting value.
Turn to the left:
Decreases the SVC setting value.
The volume difference can be set within a range of -10 to +20.