Eclipse - Fujitsu Ten CD3434 - Manual (Page 17)

17
ESN security operating procedure
ATTENTION
•If there is a problem with the inserted CD, an [ERR] message
will appear for two seconds and the CD will be ejected. Reinsert
the ejected CD.
•If a CD causes the [ERR] message to appear twice in a row, a
[CHANGE] message will appear for two seconds. Try another
CD.
•The Security indicator will flash whenever the vehicle’s ignition
is switched off.
ATTENTION
If a CD has already been inserted, a [SEC] message appears,
and then the front panel opens and CD is ejected.
How to operate the ESN (Key CD) security
Check that the Power is OFF.
Press and hold button [6], then the [FUNC] button, and
hold both for more than one second.
A [SEC] message appears, then in two seconds it will
change to [DISC].
The front panel opens; the CD3434 is now ready to accept
your Key CD in the CD slot.
2
1
Insert the CD into the slot.
The front panel closes.
A [SEC] message appears, then the Key CD is ejected.
3
How to program the Key CD
[FUNC] button
Button [6]