Eclipse - Fujitsu Ten CD3434 - Manual (Page 28)

28
Basic operation
You can set different volume levels for each audio mode. The
volume for the initial FM mode (default value: 40) is used as a
reference for storing the differences in volume that have been
set for each audio mode. When SVC is set, the volume level
can change as shown in the example settings in the table
below.
Setting example:
SVC (Source Volume Control) Mode
* : The volume levels can be set to a maximum of 80 and a minimum of
0. If you try to go past the maximum or minimum volume level, the
level will not change. For the CD changer, SVC adjusts the volume
using the setting value for the CD player.
Audio mode FM AM CD
Default value
(Volume level)
SVC setting
(Volume level)
When volume level in FM mode
is adjusted from 40 to 45
When volume level in CD mode
is adjusted from 35 to 60
When volume level in AM mode
is adjusted from 80 to 20
Reference
(40)
0
(40)
0
(40)
Reference
(40)
SVC setting value
+15
(55)
SVC setting value
-10
(30)
45 55 60 30 35
45 70 60 80* 60
70 5 20 60 0*
[AUDIO CONTROL] button