Eagle Electronics FishElite - Manual (Page 92)

84
PAGES | PAGES . The window with the black title bar at the top of the screen
is the active window. To switch back, just press PAGES | PAGES again.
Sonar Simulator
This unit has a built-in simulator that lets you run it as if you were on
the water. All sonar features and functions are useable. When in
simulator mode, you will see the chart file name in the Sonar Page title
bar and a play symbol will flash on and off at the right end of the title
bar. To use the simulator:
1. From the Sonar Page, press MENU | MENU |
↓ to
S
ONAR
S
ETUP
| ENT |
↓ to
S ONAR S IMULATOR
| ENT .
At left, Main Menu with Sonar Setup command selected. Center, sub-
menu with Sonar Simulator command selected. At right, Sonar Simu-
lator menu, with simulator turned off (check box is unchecked).
NOTE:
With Simulate Position checked, the simulator will also automatically
run the GPS simulator (if GPS data was recorded with the sonar log).
2. To use the default sonar chart log stored in the unit, press ENT | EXIT .
The recorded chart begins scrolling across the screen, just as if you
were on the water.
3. Turn off Sonar Simulator by pressing MENU | MENU |
↓ to
S ONAR
S ETUP
| ENT |
↓ to
S ONAR S IMULATOR
| ENT | ENT | EXIT .