Eagle Electronics FishElite - Manual (Page 166)

158
The command remains available in the unit's software, but we recom-
mend that you leave it in the default off (unchecked) mode. The "wan-
dering" plot trail issue has now been corrected by the Track Smoothing
feature. Turning on Position Pinning could actually result in an inaccu-
rate plot trail if you are moving around in a relatively small area. If you
want to experiment with Position Pinning, the same instructions are
used to turn the feature on (checked) and off (unchecked.)
1. Press MENU | MENU |
↓ to
GPS S ETUP
| ENT |
↓ to
P OSITION P INNING
| ENT .
2. Press EXIT | EXIT to return to the previous page.
Reset Options
To reset all features to their factory defaults:
1. Press MENU | MENU |
↓ to
S
YSTEM
S
ETUP
| ENT |
↓ to
R
ESET
O
PTIONS
| ENT |
←
to Y ES
| ENT .
NOTE:
Reset Options does not erase any waypoints, routes, icons, plot trails or
sonar logs.
Reset Options command, left,
and the Reset Options Menu, right.
Require DGPS
(SeaCharter 480DF only)
You can force the SeaCharter 480DF to require DGPS for reporting a
valid position. (The default setting, off, uses DGPS automatically when
an optional DGPS beacon receiver is connected. However, this auto
mode doesn't require DGPS reception to yield a position.) Here's how to
turn mandatory DGPS on and off.
1. Press MENU | MENU |
↓ to
GPS S ETUP
| ENT |
↓ to
R EQUIRE DGPS | ENT .
2. To return to the last page displayed, press EXIT | EXIT .
3. You can return to this command and press ENT again to turn the fea-
ture off.