Eagle Electronics FishElite - Manual (Page 185)

177
Map Page showing results of a street search.
The cursor points to the located street.
If you want to navigate to the found street at the cursor location, just
press
MENU | ENT | EXIT .
Find an Intersection
You must enter one street in the First Street dialog box and enter the
next street in the Second Street dialog box.
1. From the Map Page, press MENU |
↓ to
F IND S TREETS
| ENT and the Find
Streets Menu appears.
2. You must fill in a street name in the First Street dialog box. Press
ENT to display the Find By Name menu. There are two options: A. You
can spell out the street in the top selection box. Press
↑ or ↓ to change
the first letter, then press
→ to move the cursor to the next letter and
repeat until the name is correct, then press ENT | ENT . B. Or you can
jump down to the lower box and pick a street from the selection list.
Press
ENT , then press
↓ or ↑ to select a street from the list and press
ENT .
3. The Find Streets menu reappears with the street you're searching for
in the First Street box. (In this example, it's 80th Street.)
4. Now fill in the second street. Press
↓ to
S ECOND S TREET
| ENT and the
Find By Name menu appears again. Just like before, there are two op-
tions: A. You can spell out the second street in the top selection box.
Press
↑ or ↓ to change the first letter, then press → to move the cursor
to the next letter and repeat until the name is correct, then press
ENT | ENT . B. Or you can jump down to the lower box and pick the sec-
ond street from the selection list. Press ENT , then press
↓ or ↑ to se-
lect a street from the list and press ENT .