Tascam BD-MP4K Professional-Grade 4K UHD Blu-ray Player - Manual (Page 21)

TASCAM BD-MP4K
21
Wireless Setting More…
Use this to make wireless connection settings.*
p Scan
The unit will search for access points, allowing selection of a
network.
p Manual
An SSID can be set manually to connect.
p Auto
Connection is possible using the Wi-Fi Protected Setup (WPS)
standard.
BUDA
p BUDA Information
p BUDA Setup
Set the storage location used to save BD-Live contents.
p BUDA Information
o This shows the amount of free space in the storage location
used to save content.
o Press the ENTER button to show the Fmt buda button, and
press the ENTER button again.
This creates a BUDA folder in the selected storage location.
p BUDA Setup
The storage location used for BUDA can be set to an external
device or the internal storage.
o External: A USB flash drive connected to the unit will be
used. 2
o Onboard: The internal storage of the device will be used.
BD-LIVE Connection
Permitted/Partially Permitted/
Prohibited
Select the access level for BD-Live contents on the Internet.
o Permitted: All contents can be accessed.
o Partially Permitted: Specific contents can be accessed.
o Prohibited: BD-Live contents will be blocked.
Proxy Settings Disable/Enable
Set whether or not to connect this unit to the Internet through a
proxy server.
o Disable: Do not use a proxy server.
o Enable: A proxy host and proxy port can be set.
* 1
“ Wireless ” connections and settings can only be used if a USB-wireless LAN adapter is connected to this unit.
(A USB-wireless LAN adapter is not included with this unit.(see "Network connection overview" on page 43))
* 2
Do not disconnect the USB flash drive while using the BD-Live function. The USB flash drive should use the FAT32 file format.
RS-232C settings
Function Options Explanation
Data speed rate
p 38400 bps
p 57600 bps
p 115200 bps
This sets the communication speed when using an RS-232C to
control this unit.
NOTE
When the power is off, the speed will be 57600 bps regardless of
this setting. To turn the power on from an RS-232C, 57600 bps must
be used.