Tascam BD-MP4K Professional-Grade 4K UHD Blu-ray Player - Manual (Page 12)

12
TASCAM BD-MP4K
Button combination operations in Shift Mode
Buttons on the unit Button operation Function
SHIFT - Press simultaneously Set the lock function.
SHIFT 8 Press simultaneously Confirm (or execute).
SHIFT y Press simultaneously j (cursor down)
SHIFT 9 Press simultaneously k (cursor up)
SHIFT m Press simultaneously l (cursor left)
SHIFT , Press simultaneously ; (cursor right)
Buttons on the unit Button operation Function
7 8 Press simultaneously Open the Home Screen.
7 9 Press simultaneously
Open the disc top
menu.
7 m Press simultaneously Open the Repeat Menu.
7 , Press simultaneously Set A–B repeat.
Rear panel
w e r t u i o y p a
w ANALOG OUT (BALANCED) L/R jacks
These are balanced XLR analog output jacks.
These transmit audio signals to external speakers and
amplifiers, for example. Use XLR cables for connection.
e ANALOG OUT (UNBALANCED) L/R jacks
These are unbalanced RCA analog output jacks.
These transmit audio signals to external speakers and
amplifiers, for example. Use RCA cables for connection.
r 7.1 CH OUT (UNBALANCED) jacks
These are unbalanced RCA analog jacks for 7.1 channel
output.
These transmit 8 channels of audio signals to a 7.1 surround
system. Use RCA cables for connection.
t DIGITAL OUT (COAXIAL) connector
This is a coaxial digital audio output connector.
These transmit digital audio signals to external speakers
and amplifiers, for example. Use a coaxial cable (75Ω) for
connection.
y ETHERNET port
This is an Ethernet port.
Use to connect this unit to a network, play files on network
drives and control it remotely from a computer.
Moreover, BD-Live contents can be accessed by connecting
to the Internet. Use an STP cable that is category 5e or higher
for connection.
u HDMI VIDEO/AUDIO port
Audio and video signals are transmitted from this HDMI port.
Use an HDMI cable for connection.
NOTE
i When using 4K UHD BD, 2160p 60Hz or other high-definition
video, connect a monitor that supports the resolution using a
premium high-speed HDMI cable that supports 18 Gbps.
i When using 2160p 30Hz or 3D video, connect a monitor that
supports the resolution using a high-speed HDMI cable or a
premium high-speed HDMI cable.
i When the HDMI VIDEO/AUDIO connector is connected to
an AV amp that does not support HDMI 2.0, 4K output is not
possible even if a monitor is connected to a through output
of the AV amplifier.
i HDMI AUDIO ONLY port
Audio signals are transmitted from this HDMI port. Video
signals are not transmitted from this port. Use an HDMI cable
for connection.
NOTE
i When using an AV amplifier that does not support HDMI
2.0, connect it to this port.
i If a monitor is connected to this port, the following
message will appear. “This HDMI is audio only. Please
connect to the Amplifier!”
o USB 3.0 port
Connect/disconnect USB flash drives here.
Files, including video and music files, on the inserted USB
flash drive can be played back. Moreover, this can be used to
load update files for firmware updates.
ATTENTION
Do not connect anything to the USB port when using an SD
card to conduct a firmware update. Do not insert an SD card
in the SD card slot when using a USB flash drive to conduct a
firmware update.
p RS-232C connector
This is a 9-pin D-sub RS-232C control input/output connector.
A computer can be used to control this unit by connecting to
it with an RS-232C cable.
a AC IN connector
Connect the included power cord here.
ATTENTION
Always use the included cord to supply power to this unit.
Use of a different one could cause malfunction, fire or electric
shock.