Ashly mXa-1502 12-Channel 4-Zone DSP Mixer-Amplifier - Manual (Page 9)

5.1 Windows 10:
1) Open Computer or Windows Explorer and
click on the Network folder. The list of Network
devices should start populating. Wait for it to
complete and skip to step 3 (this could take
several minutes).
If the list doesn't populate, you probably need
to enable Windows Network Discovery - go to
step 2.
2) Click on the yellow warning text at the top of
the Network folder to enable Windows Network
Discovery. Repeat Step 1.
3) Find the mXa-1502 device in the SSDP
Plug'N'Play devices section. (If you do not see
an mXa device in the SSDP section go to step 4.
Note: the MAC address is appended to the
device name, and is also printed on the
unit's serial number sticker. Double-click on
the device icon to automatically launch the
software in your default web browser. Skip to
step 7.
4) Find the mXa-1502 device in the NetBIOS
(Samba) computing devices section. Double-
click on it and proceed to step 5.
5) Double-click on the AquaControl shared
folder and proceed to step 6.
6) Double-click on the index.html file and the
web server software will launch in your default
web browser. Proceed to step 7.
7) Log in to AquaControl software. Enter your
username and password, and click or touch the
Log In button. If this is the first log-in to a new
unit, use the factory default credentials.
5.2 OSX
1) From the desktop, click , then click on
. The list of all Network devices will
start populating. Wait for it to complete (this
could take several minutes).
2) Find the mXa-1502 device in the network
device list. The device MAC address is
appended to the device name, and is also
printed on the unit's serial number sticker.
Double-click on the mXa device name .
3) Double click on the resulting
icon.
4) Double-click on the resulting
file and the web server software will launch in
your default web browser.
5) Log in to AquaControl software. Enter your
User ID and Password, then click or touch the
Log In button. If this is the first log-in to a new
unit, use the factory default credentials.
5.3 iOS
1) Use a network device discovery app such as
"Flame" to see all available network devices.
2) Find the mXa-1502 in the list. It will have its
MAC address added after the device name.
3) Tap on the mXa-1502 device to launch
the software. Depending on the app used,
additional address or type lines may need to be
tapped before the software will launch.
4) Log in to AquaControl software. Enter your
User ID and Password, then tap the Log In
button. If this is the first log-in to a new unit,
use the factory default credentials.
5.4 Android
1) Install an Android application that can
discovery Network Plug'n'Play devices. There
are several apps that can do this. For example,
"UPnP Tool" is a free discovery app available on
the Google Play Store.
2) Launch the (UPnP Tool) network discovery
application, and it will provide a list of all
Plug'n'Play devices on your network. You
should see the MXA1502 listed, with its MAC
address appended to the name.
3) Click on the (info) information icon, ("i" in
a circle), to the right of the item to bring up
the details of the product. Then click on the
link or the link
to launch AquaControl. Your default browser
will launch and connect to the device. It is
recommended to use Chrome, Edge or Safari.
Other browsers are not supported, and may not
show content correctly.
If this is the first log-in to a new unit, use the
default factory default credentials.
9
mXa-1502 • Operating Manual