Ashly mXa-1502 12-Channel 4-Zone DSP Mixer-Amplifier - Manual (Page 30)

6.3e Settings > Network
Network configuration can be set and saved
as automatic (DHCP) or manual (Static IP).
The device MAC address is also displayed. An
"Identify Device" button pings the device to
visually identify itself by turning its COM LED
on for 10 seconds. The Reset button sets all
network parameters back to defaults.
6.3f Settings > Security (not shown)
There are four levels of security roles: Admin,
Guest Admin, Operator, and View Only.
Usernames and accounts are first defined by
the Admin using the New Profile button, then
given a security role and password.
• Admin always has full access. There can be
only one admin role.
• Guest Admin roles can be granted full
access, but each permission must be
individually authorized by the primary
admin. Guest Admin permissions include:
- Edit Accounts
- Edit Device Misc.
- Event Log Clear
- Event Scheduler edit
- Front Panel Controls edit
- Rear Panel Controls edit
- Network Settings edit
- Paging Ducking edit
- Preset edit
- Preset Recall
- System Time edit
- Trigger Settings edit
- Edit Signal Chain
- Import/Export Setting
• Operator roles have a shorter list of
permissions which must first be authorized
by the Admin. Use the Operator role to
deploy Remote Mixer or Remote DCA
control. Operator permissions include:
- Edit Signal Chain
- Front Panel Controls View
- Preset Recall
- DCA Remote
- Mixer 1-4 Remote
• View Only user roles are denied editing
access to all controls and settings.
30
mXa-1502 • Operating Manual Ashly AquaControl™ Software