Panels > front buttons, Source select, Preset recall – Ashly mXa-1502 12-Channel 4-Zone DSP Mixer-Amplifier User Manual
Page 29: Sub-preset recall, Panels > rear panels, Mic input leds, Mic phantom pwr, Mic gain, Vca input status, Trigger input status
6.3c
Settings > Panels > Front Button Settings
•
Select Mode: Front panel
buttons A-D can be
configured as a group to:
None (default), Source
Select, Preset Recall, Sub-
Preset Recall.
•
Presets/Sub-presets are
chosen from drop down list.
•
Source Select: each button
can select one exclusive
input to any mixer.
6.3d
Settings > Panels > Rear Panel
•
Set +48V phantom power
On/Off, mic preamp gain
from 0dB to 66dB, view
mic input signal level
•
VCA Inputs (1-3): Shows
current control position
•
Trigger 1-8 status, press
the [Edit] button in the
Triggers section to view all
current trigger events
•
Output mode as set from
rear panel DIP switches to
Low-Z, 25V, 70V, or 100V
•
Bridge mode: Enabled,
disabled (default)
•
Standby pin polarity:
Trigger on high, or trigger
on low (default)
•
GPO 1-2 pins: Set/display
current GPO pin status
29
mXa-1502 • Operating Manual
Ashly AquaControl™ Software