Ashly mXa-1502 12-Channel 4-Zone DSP Mixer-Amplifier - Manual (Page 10)

6 AquaControl™ Software
The mXa-1502 uses Ashly's proprietary built-in
server based software for setup and control. It
is not necessary to install the application onto
your computer or mobile device because the
program is already resident on the mXa-1502
and runs on your device browser.
A brief AquaControl software summary is
presented below:
6.1 Dashboard
The dashboard is the software screen where
the mXa-1502 first appears after logging in
with your browser. The dashboard shows the
Ashly device, number of inputs and outputs,
and firmware revision.
Remote Mixer and Remote DCA functions can
be deployed onto a remote tablet or mobile
device after they have been configured and
assigned to a limited-access operator profile
by the admin. Go to [ Settings>Security ] to set
up a new user profile and permissions, or use
Launch Quick Setup to similarly create a new
user account.
6.1b Launch Remote DCA
DCA groups are used to globally adjust the
relative levels of all channels assigned to that
group. In the DSP signal chain, a DCA block
must first be placed on every channel you
wish to assign to a DCA group, then enabled
and adjusted for each DCA group as desired.
A remote operator profile can be created
granting limited permission to use Remote DCA
on a tablet or mobile device.
6.1c Launch Quick Setup
Launch the Quick Setup, then run the wizards
to create a new user account, set up the
network, schedule an event, or trigger events.
6.1a Launch Remote Mixer
A remote mixer would typically get launched
from a tablet or mobile device, granting an
operator limited permission to control mixer
levels for a specific zone.
In the [
Settings>Security ] or Launch Quick
Setup screen, a new user profile is set up for
the operator whereby they are granted limited
access to the mixer used for that zone's output.
The operator would log in then launch the
remote mixer. The remote operator should
additionally check [Remember Me] when first
logging in order to retain the network link.
10
mXa-1502 • Operating Manual Ashly AquaControl™ Software