Osubwoofer output, Ocrossover, Olfe distribution – Marantz AV 10 Reference 15.4-Channel Home Theater Preamplifier/Processor User Manual
Page 240
o
Subwoofer Output
Selects which low frequency signals are sent to the subwoofer outputs.
LFE
(Default):
When “2ch Playback” - “Front” is set to
“Large”, only LFE signals are output from
the subwoofer. Also, when “2ch
Playback” - “Front” is set to “Small”, the
front channel low range signals are
added to the LFE signals and output from
the subwoofer.
LFE + Main:
The front channel low range signal is
added to the LFE signal output from the
subwoofer.
0
This can be set when “2ch Playback” - “Subwoofer” is set to “Yes”.
o
Crossover
Set the maximum frequency of the bass signal output from each
channel to the subwoofer.
40 Hz
/
60 Hz
/
80 Hz
/
90 Hz
/
100 Hz
/
110 Hz
/
120 Hz
/
150 Hz
/
180 Hz
/
200 Hz
/
250 Hz (Default: 80 Hz)
0
This can be set when “2ch Playback” - “Subwoofer” is set to “Yes”.
0
When “2ch Playback” - “Front” is set to “Large” and “Subwoofer Output” is set
to “LFE”, “Full Band” is displayed and this cannot be set.
o
LFE Distribution
Adjusts the amount of LFE signal sent to the large front speakers.
Off
(Default):
Front Speakers do not play LFE signals.
–20 dB – 0 dB
Adjusts the amount of LFE signal sent to
the front speakers
0
This setting cannot be set when “2ch Playback” - “Front” is set to “Small”.
240