Marantz AV 10 Reference 15.4-Channel Home Theater Preamplifier/Processor - Manual (Page 198)

TV Format
Set the video signal format to be output for the TV you are using.
o Format
NTSC
(Default):
Select NTSC output.
PAL: Select PAL output.
0 “Format” can also be set by the following procedure. However, the menu
screen is not displayed. Following the display content to make the setting.
1. Press and hold the main unit’s STATUS and ZONE3 SOURCE at the same
time for at least 3 seconds.
“
z Video Format ” appears on the display.
2. Use the main unit’s cursor Left or cursor Right and set the video signal
format.
3. Press the main unit’s ENTER to complete the setting.
NOTE
0
When a format other than the video format of the connected TV is set, the
picture will not be displayed properly.
Contents Connections Playback Settings Tips Appendix
198
Front panel Display Rear panel Remote Index