Marantz AV 10 Reference 15.4-Channel Home Theater Preamplifier/Processor - Manual (Page 156)

Changing the settings
1
Set the items below to the settings you want to
register.
The following settings from
A
to
K
can be memorized for MAIN
ZONE, and settings
A
and
B
can be memorized for ZONE2 and
ZONE3.
A
Input source ( v p. 87)
B
Volume ( v p. 88)
C
Sound mode ( v p. 137)
D Audyssey (Audyssey MultEQ ® XT32, Audyssey Dynamic EQ ® ,
Audyssey Dynamic Volume ® , Audyssey LFC™) ( v p. 183)
E
“M-DAX” ( v p. 181)
F
“Adjusting the volume of each channel to match the input source
(Channel Level Adjust)” ( v p. 130)
G
“Displaying your desired video during audio playback (Video
Select)” ( v p. 134)
H
“All Zone Stereo” ( v p. 135)
I
“Speaker Preset” ( v p. 136)
J
“HDMI Video Output” ( v p. 193)
K
“TV Audio sharing settings” ( v p. 157)
0 Press and hold SMART SELECT while a radio station is being received is
being played back with any of the following sources, the current radio
station is memorized.
0
Tuner / Internet Radio Station / Spotify
2
Press MAIN, Z2 or Z3 to select the operating zone with
the remote control.
The indicator for the selected zone is lit.
3
Press and hold the desired SMART SELECT until
“Smart z Memory”, “Z2 Smart z Memory” or “Z3
Smart z Memory” appears on the display.
The current settings will be memorized.
z is displayed the number for the SMART SELECT button you
pressed.
o Changing the Smart Select Name
The MAIN ZONE Smart Select name displayed on the TV screen or
display of this unit can be changed to a different name.
For the name change method, see “Smart Select
Names” ( v p. 256).
Contents Connections Playback Settings Tips Appendix
156
Front panel Display Rear panel Remote Index