Getting ready to build, Caution – Dremel Digilab 3D45-EDU Printer for Education User Manual

Page 25

Getting Ready to Build

9. Filament will be drawn into the extruder

and begin to exit from the hot extruder tip.

NOTE:

Your Dremel 3D45 was tested by

building objects before leaving the factory.

These test objects may have been made

with a different filament color than you are

using. Therefore, a small amount of

filament may be remaining in the extruder.

10. When new filament appears from

extruder tip, tap “done” on touch screen

to complete filament load process,

return to main menu, and calibrate

extruder. Carefully remove excess

filament without touching hot extruder

tip. If necessary, carefully remove debris

from extruder tip with needle nose

pliers.

Use extra care not to

damage the extruder tip

when clearing debris. Dremel 3D45 will not

work properly with a damaged extruder tip

and will require replacement.
11. Close 3D45 lid and door.

CAUTION

FILAMENT TyPE AND SETTINGS

Filament Type

PLA

ECO-ABS

Nylon

PETG

Nozzle Temperature Range

190 -240 C

220 – 280 C

230-260 C

Optimal Nozzle Temperature

220 C

255 C

250 C

Build Platform Temperature Range

0 – 60 C

0 – 70 C

0 – 100 C

0 – 80 C

Optimal Build Platform Temperature

35 C

45 C

80 C

70 C

Print Speed Multiplier

0 – 100%

Recommended Speed Multiplier

100%

90%

100%

Fan Range

0 – 100%

Object cooling fan setting

100%

50%

100%

NOTE:

Please check website digilab.dremel.com for latest filament settings.

DM 2610047405AB 03-18_3D45 3/27/18 9:51 AM Page 25