Dremel Digilab 3D45-EDU Printer for Education - Manual (Page 20)

Touch Screen
20
ABOUT
Tap to see 3D45 information such as firmware
version, usage counter, printer status, MAC
address, and token.
Indicates that there is an error such as filament empty or door open.
Indicates that Ethernet is connected.
Indicates WiFi signal strength and connected status.
Indicates that the extruder and build platform is cool.
Indicates that the extruder and build platform is warm.
Indicates that the extruder and build platform is hot.
Indicates that the printer is connected to 3DPrinterOS printing
services and that it can receive remote commands.
Touch Screen Icons
DM 2610047405AB 03-18_3D45 3/27/18 9:51 AM Page 20