Quantum Instruments Qflash TRIO Basic Flash for Cameras - Manual (Page 4)

Flash Display Symbols
The top portion of the display contains information relating to the status
of the internal radio, and the options that are set on the flash.
See Section 8 for setting the radio and Section 9 for setting the options.
Note : in some modes the radio mode will be set automatically.
2
FIRE OPT SAVE RADIO
CH 4 TX 12-4 N
Tx – Radio set as Transmitter
for SYNC / LINK / QTTL
Rx – Radio set as Receiver
Reflector type N – normal
D – diffusor
wide angle dome
soft box
B – bare bulb reflector
or bare bulb
CH – Channel setting
of internal radio,
0 through 7.
1234 – Zones that are turned
on. If a zone is off it will be
replaced by a “-“.
Speaker on
Flash LED
indicators on
Flash compensation set
Flash ready
MODE
/OK
SET
+
-