HP Z34C G3 34" 21:9 Curved WQHD IPS Monitor - Manual (Page 30)

5. If you want to change the size of the PiP, select PiP Size in the OSD, and then select the size that you
want.
6. If you want to adjust the position of the PiP, select PiP Position in the OSD, and then select the position
that you want.
Adjusting blue light output (select products only)
Decreasing the blue light emitted by the monitor reduces the blue light exposure to your eyes. This monitor
allows you to select a setting to reduce blue light output and create a more relaxing and less stimulating
image while you read content on the screen.
To adjust the blue light output from the monitor:
1. Press one of the OSD buttons to activate the buttons, and then press the Menu button to open the OSD.
Select Color.
If you are using a controller, press the center of the OSD controller to open the OSD.
2. Select Low Blue Light from the setting options.
● Low Blue Light: (TÜV certified) Reduces blue light for improved eye comfort.
● Reading: Optimizes blue light and brightness for indoor viewing.
● Night: Adjusts to the lowest blue light and reduces the impact on sleep.
3. Select Save and Return to save your setting and close the menu. Select Cancel if you do not want to save
the setting.
4. In the Main menu, select Exit.
Using low blue light mode (select products only)
Decreasing the blue light emitted by the monitor reduces the blue light exposure to your eyes. This monitor
uses a low blue light panel in default setting mode.
In the default setting mode, this monitor's low blue light panel is certified by TÜV to reduce blue light output
and create a more relaxing and less stimulating image while you read content on the screen.
Adjusting blue light output (select products only) 25