HP Z34C G3 34" 21:9 Curved WQHD IPS Monitor - Manual (Page 25)

1. If the monitor is not already on, press the power button to turn on the monitor.
2. Press the center of the OSD controller.
3. Move the controller up, down, left, or right to navigate menu choices. Press the center of the controller to
make a selection.
The following table lists possible menu selections in the OSD main menu. It includes descriptions for each
setting and its impacts on your monitor's appearance or performance.
Table 3-1 OSD menu options and descriptions for using a button or a controller (select products only)
Main menu Description
Brightness Adjusts the brightness level of the screen. The factory default is 90.
Color Provides a variety of color presets that configure the monitor for different viewing situations.
Image Adjusts the screen image, including brightness, contrast, dynamic contrast, gamma, sharpness, and image
scaling.
Power Adjusts the power settings.
Contrast Adjusts the contrast level of the screen. The factory default is 80.
Input Selects the video input signal (DisplayPort or HDMI).
Audio Adjusts the volume level of the screen. The factory default is 30.
Menu Adjusts the OSD menu and function button controls.
Management Returns all OSD menu settings to the factory default settings.
USB Host Selection Selects the USB host (button only).
Information Provides information about the monitor such as optimal display mode, power mode, and serial number.
Exit Exits the OSD menu screen.
Using the OSD function buttons
The function buttons offer useful actions, and you can customize all but one of them to make them even more
useful.
NOTE: The actions of the function buttons vary among monitor models.
For information about changing the function of the buttons, see Reassigning the function buttons on page
21 .
20 Chapter 3 Using the monitor