HP Z31x 31.1" 17:9 DreamColor Studio Cinema 4K IPS Display User Manual

Page 19

●

Connect one end of a USB Type-C cable to the downward facing USB Type-C port on the rear of the

monitor and the other end to the USB Type-C port on the source device. (Use only the HP-approved

USB Type-C cable provided with the monitor.)

NOTE:

The monitor’s USB Type-C port provides network, data, video, and power delivery (up to

100 W).
The host device must be able to support DisplayPort Alt Mode (video, charging, and USB) over the

USB Type-C connector. The host device must also be compatible with USB Type-C-Thunderbolt™-

enabled ports.

If you connected the monitor to the source device using the DisplayPort connector or HDMI port and

want to enable the downstream USB connectors on the monitor, connect one end of the USB Type-C

cable to a downward facing USB Type-C port on the rear of the monitor and the other end to a USB Type-

C port on the source device. (Use only the HP-approved USB Type-C cable provided with the monitor.)

Setting up the monitor