HP OMEN 27" HDR 165 Hz Gaming Monitor - Manual (Page 26)

section of the screen. You can select FPS text colors and screen locations from the Color and Location
submenus.
To view the FPS on the screen:
1. Press the center of the OSD joystick to open the OSD menu.
2. Select Gaming.
3. Select Frame Rate, and then select On.
4. Set the color and location of the FPS that is displayed on the screen.
● Task Light: Full white and bright setting to emulate a white desk light for better reading or viewing.
● Color Cycle: Slowly fades between all static color presets.
● Breathing: Slowly fades on and off. Speed has three settings Slow, Medium, and Fast. Color is
decided by the color selected in the static color menu.
● Static Color: Sets external lighting colors to Red, Green, Blue, Yellow, Purple, Cyan, Orange, or
custom.
● Random Color: Randomly cycles external light color through the static colors.
● LED Brightness: Adjusts the external LED brightness.
External lighting is set to On (OMEN White) by default.
Using Message Timers
The Message Timers show timers that display reminders and messages.
To use the message timers:
The Message Timers menu presents two types of timers that display preset reminders and information
messages. The timer menu has an On/Off option and Start, Stop, and Reset controls. Selecting On shows the
currently selected timer value at the current selected location of the screen. The default is the top right
corner.
20 Chapter 3 Using the monitor